Maryland Electrical Panel Permit Requirements

Does Maryland Require a Permit for Electrical Panel Replacement?

Yes. Like all U.S. states, Maryland requires a permit for residential electrical panel replacements and service upgrades. Permits are issued at the county or city level through local building departments.

Maryland allows homeowner permits in most jurisdictions. Baltimore City requires a licensed contractor. Permits are issued by county building departments. Pepco, BGE (Baltimore Gas & Electric), and Delmarva Power serve major portions of the state.

Can Homeowners Pull Their Own Electrical Permit in Maryland?

Owner-builder status in Maryland: Yes (Baltimore City: verify). Homeowners who occupy their property as a primary single-family residence may apply for the permit themselves in most Maryland jurisdictions, subject to local rules. Always verify with your specific county or city building department, as local rules can be more restrictive.

How to Apply for an Electrical Panel Permit in Maryland

1. Find your local building department. Search "[your county or city] Maryland electrical permit" to locate the official portal or office.
2. Gather your documents: property address, parcel number, description of work, current and new panel amperage, and owner-builder declaration if self-permitting. Use our pre-application checklist.
3. Submit your application online or in person and pay the permit fee (typically $65–$175).
4. Contact your utility provider to schedule the service disconnect once your permit is approved. See our utility disconnect guide.
5. Complete the work, schedule your inspection, and receive your certificate of completion.

What Maryland Electrical Inspectors Check

Maryland inspectors follow NEC 2020. Key points: proper grounding and bonding, correct breaker sizing, AFCI/GFCI protection on required circuits, working clearances (NEC 110.26), all circuits labeled, and no open knockouts. Use our inspection checklist to prepare.